Cryptostorm Mac Issues

Looking for assistance with a cryptostorm connection issue? Post here & we'll help out. Also: if you're not sure where to post, do so here & we'll move things around as needed. Also: for quickest support, email our oddly calm & easygoing support reps at support@cryptostorm.is :)
AP

Cryptostorm Mac Issues

Post by AP » Thu Mar 11, 2021 1:55 pm

Greetings guys,

It appears I am facing issues with getting Cryptostorm to run properly on Mac. I tried both the Tunnelblick and the WireGuard setups and neither work. TunnelBlick doesn't even connect and WireGuard connects (Status: Active) but no DNS resolution works and no direct ping does either. Any ideas?

Kind regards,
AP

User avatar
df
Site Admin
Posts: 472
Joined: Thu Jan 01, 1970 5:00 am

Re: Cryptostorm Mac Issues

Post by df » Sun Mar 14, 2021 1:44 am

Make sure you're using the latest WireGuard according to https://www.wireguard.com/install/ (as of this post, v1.0.12 via the App Store), and double check any firewall settings that might block the traffic, or routing settings that might conflict with 10.10.x.x (what WireGuard uses internally). You could also try WireGuard on another system and see if it works with your publickey/PSK/IP/etc., if not then you could try removing the key from your token @ https://cryptostorm.is/wireguard_man then readding it with https://cryptostorm.is/wireguard

As for Tunnelblick, make sure you're not skipping the step shown in Image
from the instructions on https://cryptostorm.is/macintosh.html
The OpenSSL/OpenVPN required by the different config types are listed at the top of https://cryptostorm.is/configs/

User avatar
df
Site Admin
Posts: 472
Joined: Thu Jan 01, 1970 5:00 am

Re: Cryptostorm Mac Issues

Post by df » Wed Mar 24, 2021 10:02 am

The WireGuard issue should be resolved now, see viewtopic.php?f=32&t=29355&p=45401#p45401

Post Reply